Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Hall sender (phase sensor) to valve cover 1-4/5-8 | M6 x 16 (2 ea.) | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Hall sender (phase sensor) to valve cover 1-4/5-8 | M6 x 16 (2 ea.) | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Bar ignition module to valve cover | M6 x 16 (8 ea.) | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Valve cover to cylinder head | M6 x 30 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Valve cover to cylinder head | M8 x 35 (two on eyelet and two on torque support) | Tightening torque | 23 Nm (17 ftlb.) | ||
| Transport eyebolt and valve cover to cylinder head | M8 x 35 (4 ea.) | Tightening torque | 23 Nm (17 ftlb.) | ||
| Cover piece to valve cover | M5 x 16 (8 ea.) | Tightening torque | 4.4 Nm (3.0 ftlb.) | ||
| Valve cover to cylinder head | M8 x 35 (two on eyelet) | Tightening torque | 23 Nm (17 ftlb.) | ||
| Valve cover to cylinder head | M6 x 30 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Bar ignition module to valve cover | M6 x 16 (8 ea.) | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Cover piece to valve cover | M5 x 16 (8 ea.) | Tightening torque | 4.4 Nm (3.0 ftlb.) | ||
| Wire harness ground point on valve cover | M6 | Tightening torque | 10 Nm (7.5 ftlb.) |