LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (15 - Engine - Cylinder Head, Valve Control) >> WM 156120 Removing And Installing Valve On 4.8-Litre DFI Engines (Except Cayenne Tip, Cayenne Man, Cayenne Diesel, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head. → 157019 REMOVING AND INSTALLING CYLINDER HEAD ON 4.8-LITRE DFI ENGINES 
  2. Remove the camshafts. → 150520 REMOVING AND INSTALLING CAMSHAFTS ON 4.8-LITRE DFI ENGINES 
  3. Take hydro-tappets out of the cylinder head and lay them on a clean surface, arranged according to cylinders and valves. Do not confuse components. For details, see →  WM 155920 REMOVING AND INSTALLING HYDRAULIC TAPPETS ON DFI ENGINES  
scientia non olet · About LEMON Manuals