Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws | Always replace | Tightening torque | 8 Nm (6 ftlb.) | ||
| Camshaft controller | Fastening screw | Tightening torque | 60 Nm (44 ftlb.) | ||
| Camshaft controller | Torque angle | 90° | |||
| Camshaft controller | Fastening screw | Tightening torque | 60 Nm (44 ftlb.) | ||
| Camshaft controller | Torque angle | 90° | |||
| Bearing pin | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Chain tensioner | Tightening torque | 40 Nm (30 ftlb.) |