LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (17 - Engine - Lubrication) >> WM 170419 Removing And Installing Oil Pressure Sensor On 4.8-Litre DFI Engines (Cayenne S Tip, Cayenne S Man, Cayenne Turbo, Cayenne GTS Tip, Cayenne GTS, Cayenne Turbo S) >> Removing Oil Pressure Sensor

Removing Oil Pressure Sensor

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull off cable plug for oil pressure sensor.
  2. Place a cloth around the components. Collect dripping oil.
  3. Remove oil pressure sensor (oil pressure sender) with adapter -3 and 1-  . To do this, remove the two screws -4-  and pull the components straight off. Replace sealing rings.
    Fig 1: Identifying Oil Pressure Sensor And Oil Pressure Measuring Point
    G09409530Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. Oil pressure sensor adapter
    2. O-ring
    3. Oil pressure sender with temperature sensor
    4. Screw, M6 x 40
    5. Stopper; test connection
    6. Sealing ring
    1. Direction of travel
scientia non olet · About LEMON Manuals