Installing Oil Pressure Sensor
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Clean all traces of oil from installation location of oil pressure sensor.
Information
Do not turn the oil pressure sensor in the adapter. Risk of breakage!
Do not break off sensor tips! Insert carefully.
- Move oil pressure sensor (oil pressure sender) with adapter and new sealing rings into installation position -3 and 1-
. Position and fit the two screws -4-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Oil pressure sensor adapter
- O-ring
- Oil pressure sender with temperature sensor
- Screw, M6 x 40 → Tightening torque: 10 Nm (7.5 ft lbs.)
- Stopper → Tightening torque: 15 Nm (11 ft lbs.)
- Sealing ring
- Direction of travel
- Connect cable plug for oil pressure sensor.