LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (28 - Ignition System) >> WM 287020 Removing And Installing Spark Plugs On DFI Engines (Except Cayenne Diesel) >> Removing Spark Plugs

Removing Spark Plugs

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Broken spark plug electrodes
  • Bits of electrodes can fall into the combustion chamber

→ Only check electrode gap of spark plugs, but do not bend them.

→ Spark plugs with an incorrect electrode gap must be replaced.

Information 

Use only spark plugs approved by Porsche AG! 

Check electrode gap before screwing in a new spark plug. 

  1. Remove spark plug using special tool spark plug wrench 3122 B. Fig 1
    Fig 1: Loosening Spark Plugs Using Spark Plug Wrench
    G09410368Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Check electrode gap. → Nominal value: 0.9 mm → Maximum value: 1.1 mm 
    Fig 2: Checking Electrode Gap Of Spark Plug In V6 Engine
    G09410369Courtesy of PORSCHE CARS NORTH AMERICA, INC.