Removing Hall Sender
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Mark hall sender cable plugs according to position of intake and outlet camshafts.
- Have a mirror and lamp to hand in case the installation position is difficult to see.
- Pull off cable plugs on camshaft hall senders. Use special tool assembly tool T10118 or an angled piece of wire for this purpose.
- Unscrew the fastening screws on the hall senders -2- and carefully remove the hall senders.