LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (28 - Ignition System) >> WM 282020 Removing And Installing DFI Bar Ignition Modules (Except Cayenne Diesel) >> Removing Bar Ignition Modules

Removing Bar Ignition Modules

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove bar ignition modules. For securely seated bar ignition modules, use the special tool puller T10095 A -A-  to do this.
    Fig 1: Locating Puller (T10095 A)
    G09410362Courtesy of PORSCHE CARS NORTH AMERICA, INC.