LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (26 - Exhaust System) >> WM 267319 Removing And Installing (Main) Catalytic Converter On 3.6-Litre V6 DFI Engines (Cayenne Tip, Cayenne Man) >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Exhaust clamp Maximum transverse inclination Adjustment value 10°    
Main catalytic converter to primary catalytic converter M8 nut; replace Tightening torque 23 Nm (17 ft lbs.)    
Exhaust clamp replace; tighten uniformly Tightening torque 23 Nm (17 ft lbs.)    
Main catalytic converter to transmission support M8 Tightening torque 23 Nm (17 ft lbs.)    
Main catalytic converter to body M8 Tightening torque 23 Nm (17 ft lbs.)