Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Ball clamp on tailpipes | Replace | Tightening torque | 35 Nm (26 ft lbs.) | +/-3.5 Nm (+/- 2.5 ft lbs.) | |
| X = distance from upper part of rear apron | Gap dimension X | 18 mm | |||
| Y = work out distance at sides to the left and right uniformly | Gap dimension Y | 20 mm | |||
| X = distance from upper part of rear apron | Gap dimension X | 18 mm | |||
| Y = work out distance at sides to the left and right uniformly | Gap dimension Y | 20 mm | |||
| X = distance from upper part of rear apron | Gap dimension X | 7 mm | |||
| Y = work out distance at sides to the left and right uniformly | Gap dimension Y | 7 mm | |||
| Fastening screw securing cover to rear apron | Tightening torque | 4.5 Nm (3.5 ft lbs.) | +/-0.5 Nm (+/- 0.5 ft lbs.) |