Installing Front Brake Calliper
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Replace screws and lock nuts.
- Never use an impact bolter to loosen and tighten the brake calliper on the wheel carrier.
- Observe correct tightening torques → Tightening torques .
The brake calliper is installed in reverse order.
- Fit the brake calliper.
- Fit the brake line to the brake calliper.
- Clip in the wear indicator connector.
- Position disc brake pads by operating the brake several times.