Air cleaner housing for V6

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Remove the complete air cleaner housing.
1. Pull out oil dipstick. -1-
  
  Fig 1: Removing Oil Dipstick
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Loosen fastening screw on power-steering oil reservoir and set the reservoir aside. Dipstick, power-steering oil reservoir
3. Remove ground point for jump-lead starting underneath the wing next to the air cleaner housing with a cap nut.
4. Remove screw on air cleaner housing -arrow- . Pull air cleaner housing up out of the rubber holders
  
  Fig 2: Locating Air Cleaner Housing Mounting Screw (Right)
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Press off air intake at the bottom of the air cleaner housing -arrow- .
  
  Fig 3: Pressing Off Air Intake At Bottom Of Air Cleaner Housing
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. Turn the air cleaner housing and pull it up and out.
  
  Fig 4: Identifying Air Cleaner Housing
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.