Preliminary Work
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- To allow easier access to the pneumatic spring housing, the roof trim panel must be loosened slightly at the back once the following parts have been removed.
- Remove rear roof trim panel. → Removing rear roof lining
- Remove D-pillar trim panel. → Removing D-pillar trim
- Remove rear grab handles left and right. → Removing Rear Handle