LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (55 - Lids, Flaps) >> WM 559119 Removing And Installing Rear Lid Hinge (All Models) >> Removing Rear Lid Hinge

Removing Rear Lid Hinge

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Lid Hinge Position
G09421604Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Remove rear window → Removing Rear Window .
  2. Remove rear lid → Removing Rear Lid  .
  3. Remove hinge cover.
    1. 3.1. Insert a plastic wedge between the body and hinge cover -1-  .
    2. 3.2. Carefully unclip and remove the hinge cover -1-  .
      Fig 2: Removing Hinge Cover
      G09421605Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Remove rear gas spring. → Removing Pneumatic Spring For Rear Lid  .

    On vehicles with an automatic rear lid, remove actuating cylinder. → Removing Actuating Cylinder For Rear Lid 

  5. Remove lid hinge.
    1. 5.1. Undo fastening screws -2-  .
    2. 5.2. Remove lid hinge -3-  to the rear.
      Fig 3: Removing Lid Hinge And Fastening Screws
      G09421606Courtesy of PORSCHE CARS NORTH AMERICA, INC.