LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (55 - Lids, Flaps) >> WM 558419 Removing And Installing Rear Lid Release Motor (All Models) >> Removing Rear Lid Release Motor

Removing Rear Lid Release Motor

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Motor For Rear Lid Release
G09421544Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Press connector together -arrows-  and pull out connector.
    Fig 2: Pulling Off Plug
    G09421545Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Pull control rod out of lid release.
    Fig 3: Pulling Control Rod Out Of Lid Release
    G09421546Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Undo the three fastening screws on the motor.
  4. Remove motor from the mounting point by lifting up and then pulling out to the side.
    Fig 4: Removing Motor
    G09421547Courtesy of PORSCHE CARS NORTH AMERICA, INC.