LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (55 - Lids, Flaps) >> WM 552219 Removing And Installing Front Lid (All Models) >> Removing Front Lid

Removing Front Lid

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Lid
G09421410Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Open front lid.
  2. Remove insulation for front lid.
  3. Remove wire harness on front lid → Removing wire harness for bonnet
  4. Remove pneumatic spring on front lid → Removing Front Pneumatic Spring 
  5. Remove front lid.
    1. 5.1. Undo fastening nuts -2-  and unscrew from the studs -Arrow A-  .
    2. 5.2. Remove -1-  front lid -Arrow B-  .
      Fig 2: Removing Front Lid Of Fastening Nuts And Studs
      G09421411Courtesy of PORSCHE CARS NORTH AMERICA, INC.
      Fig 3: Removing Front Lid
      G09421412Courtesy of PORSCHE CARS NORTH AMERICA, INC.