Removing Wing Trim Panel

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

The removal and installation of the wing trim panel is described for a removed wing.
If the wing trim panel is removed when the wing is installed, the front door must be removed . → Removing Front Door

Press back the pins of the -2- expansion rivets -1- (-arrow A- ), until the expansion rivets -1- are completely relieved.

Fig 1: Pressing Back Pins Of Expansion Rivets
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove expansion rivets -1- and wing trim panel -3- .