Subsequent Work For Body Repairs
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Remove vehicle from the alignment bench.
- Clean welded joints and sheetmetal flanges with a wire brush.
- Prime flange areas with 2K primer.
- Restore standard seal with body sealant → 5000IN SEAM SEALING .
- Restore standard undersealing with underbody sealant → 5000IN UNDERBODY PROTECTION .
- Paint repair area and adjacent surfaces, if necessary.
- Apply cavity preservation to the accessible areas of the repair. → 5000IN CAVITY PRESERVATION .
- Install removed accessories in the repair area.