Identifiable Deformations On The Body Structure
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Visual inspection of the structural parts for creasing and bending, starting from the point of impact toward the centre of the vehicle
- Visual inspection of the structural parts at the joints for gaping panel connections (e.g. entry area at the side member under the rubber seal of the door)
- Drive the vehicle onto a lifting platform and raise it. Measure the measuring points or reference points specified in the repair check dimensions table diagonally, horizontally and vertically using a beam compass or an electronic measuring system and compare with the specified values.
- Decide whether vehicle is technically repairable
- Decide whether vehicle is economically repairable
Repair vehicle, if necessary.