LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (50 - Body Front- Cayenne) >> WM 5000IN Work Sequence For Accident Repair (All Models) >> Information >> Replacement

WM 5000IN Work Sequence For Accident Repair (All Models): Information: Replacement

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cover undamaged areas of the vehicle so that they are protected against fire
  2. Disconnect battery
  3. Pre-paint new parts from the inside
  4. Reshape damaged area by straightening so that adjacent contours or gap dimensions correspond to the standard condition
  5. Roughly cut out damaged areas
  6. Cut out remaining pieces
  7. Fit new parts in, then check the gap dimensions with the accessories fitted
  8. Protect spot-welded flanges against corrosion
  9. Observe safety and quality instructions on welding
  10. Weld in new parts
  11. Grind visible weld seams flat; if necessary apply body solder or filler
scientia non olet · About LEMON Manuals