LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (50 - Body Front- Cayenne) >> WM 5000IN Processing Structural Body Adhesives (All Models) >> Processing Adhesives >> Preparing Adhesive Flanges >> Remove excess material

Remove excess material

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Remove most of the excess material with paper or cloth. Finish cleaning visible surfaces with a cloth soaked in acetone. Hardened material can only be removed mechanically.

scientia non olet · About LEMON Manuals