LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (50 - Body Front- Cayenne) >> WM 5000IN Processing Structural Body Adhesives (All Models) >> Processing Adhesives >> Preparing Adhesive Flanges >> Jointing operation

Jointing operation

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Join, fix and resistance spot-weld parts within the working time. The jointing operation must take place directly after application of the adhesive in order to guarantee a high quality and reliable bond. Otherwise the adhesive bead must be removed, with pre-treatment of the surface and application of the adhesive being repeated.

scientia non olet · About LEMON Manuals