Preparing Adhesive Flanges: Hardening
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
The body structural adhesive used hardens at room temperature. Hardening can be accelerated by heat (e.g. with an infrared radiator in a painting booth). Do not load bonded parts until hardening is complete.
| |
Teromix 6700 adhesive set |
Terokal 5045 adhesive set |
| Initial strength at (23 °C) |
Approx. 2 h |
Approx. 6 h |
| Hardening time at room temperature (23 °C) |
Approx. 6 h |
Approx. 36 h |
| Hardening time at 80 °C |
Approx. 10 min |
Approx. 45 min |
| Max. hardening temperature |
Approx. 140 °C |
Approx. 180 °C |