LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (50 - Body Front- Cayenne) >> WM 5000IN Processing Structural Body Adhesives (All Models) >> Processing Adhesives >> Preparing Adhesive Flanges >> Further work on the vehicle

Further work on the vehicle

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

The time from joining the repaired components to handing over the vehicle to the customer must be at least 48 hours. After repairs with adhesive, allow at least ten hours before moving or carrying out further work on the vehicle (leave standing overnight) to avoid damage to the bonded joint by premature loading.