Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| lower edge of wing to middle of axle |
|
Control value |
502 mm |
+/-10 mm |
|
| Wheel bearing |
|
assembling force |
90 KN |
|
|
| Circlip |
|
Minimum dimension |
15 mm |
|
|
| Wheel hub |
|
assembling force |
40 KN |
|
|