LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (40 - Front Wheel Suspension, Drive Shafts) >> WM 404119 Removing And Installing Front Drive Shaft (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mount the drive shaft on the transmission and tighten to the specified tightening torque. → WM 4000TW TIGHTENING TORQUES FOR FRONT AXLE 
  2. Tighten lock nut for the drive shaft to the specified tightening torque. → WM 4000TW TIGHTENING TORQUES FOR FRONT AXLE  Operate the brake whilst doing so (second fitter required).
  3. Fit the wheel → Removing and installing wheel and tighten to the specified tightening torque. → WM 4000TW TIGHTENING TORQUES FOR FRONT AXLE 
scientia non olet · About LEMON Manuals