WM 398819 Removing And Installing Four-Wheel Final Drive (Except Cayenne GTS Tip "PORSCHE Design Edition 3"): Tools
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Designation | Type | Number | Description | |
|---|---|---|---|---|
| multiple-tooth socket-wrench insert M12 | Commercially available tool | Nr.31 | ||
| spring compressor | VW tool | VW 552 |
TECHNICAL VALUES
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Final drive to front-axle carrier | Initial tightening | 90 Nm (67 ft lbs.) | |||
| Final drive to front-axle carrier | Final tightening | 90° |