LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (19 - Engine - Cooling) >> WM 195019 Removing And Installing Coolant Pump On DFI Engines (Except Cayenne Diesel, Cayenne S TRANSSYBERIA Tip, Cayenne TRANSSYBERIA Man, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit drive belt. → Removing and installing drive belt
  2. Install intake manifold. → Installing air box for throttle housing (intake pipe upstream of throttle valve)
  3. Fill and bleed the cooling system according to instructions. → Filling The Cooling System (Includes Bleeding) 
scientia non olet · About LEMON Manuals