LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (13 - Engine - CRANKGEAR, Pistons) >> WM 137319 Removing And Installing Belt TENSIONER On DFI Engines (Except Cayenne Diesel, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Removing Belt Tensioner

Removing Belt Tensioner

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Screw M8 x 50 screw -arrow-  into the belt tensioner.

    Slacken the belt tensioner until the drive belt is loose.

    Fig 1: Locating Belt Tensioner
    G09409044Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Loosen fastening screws for belt tensioner. -arrows- 
  3. Remove belt tensioner.
    Fig 2: Locating Belt Tensioner Mounting Bolts
    G09409045Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals