LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (13 - Engine - CRANKGEAR, Pistons) >> WM 136319 Removing And Installing Drive Plate For Torque Converter On DFI Engines (Except Cayenne Man, Cayenne S Man, Cayenne Diesel, Cayenne TRANSSYBERIA Man) >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Drive plate to crankshaft M10 Initial tightening 60 Nm (44 ft lbs.)    
Drive plate to crankshaft M10 Torque angle 90°    
scientia non olet · About LEMON Manuals