Subsequent Work
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Install piston. → 131019 REMOVING AND INSTALLING PISTONS ON V6 DFI ENGINES
- Piston rings (move gap by 120°)
- Pistons
- Circlip
- Connecting rod
- Connecting rod bearings must always be replaced . Observe relevant classification.
- Connecting rod bearing cap
- Connecting rod bolts → Initial tightening: 30 Nm (22 ft lbs.) → Torque angle: 90°
- Cylinder block
- Piston pins