Technical Values
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting rod cap to connecting rod | M9 x 56 (16 ea.) Step 1 Tightening sequence as synchronous as possible; use new bolts | Tightening torque | 8 Nm (6 ft lbs.) | +2 Nm (+1.5 ft lbs.) | |
| Connecting rod cap to connecting rod | M9 x 56 (16 ea.) Step 2 Tightening sequence as synchronous as possible; use new bolts | Tightening torque | 20 Nm (15 ft lbs.) | ||
| Connecting rod cap to connecting rod | M9 x 56 (16 ea.) Step 3 Tightening sequence as synchronous as possible; use new bolts | Tightening torque | 40 Nm (30 ft lbs.) | ||
| Connecting rod cap to connecting rod | M9 x 56 (16 ea.) Step 4 Tightening sequence as synchronous as possible; use new bolts | Torque angle | 90° | ||
| Oil guide (oil plate) to lower part of crankcase | M6 x 20 (6 ea.) | Tightening torque | 10 Nm (7.5 ft lbs.) |