Subsequent Work
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Install engine guard → WM 108019 REMOVING AND INSTALLING ENGINE GUARD (UNDERBODY PANELLING) on DFI engines.
- Complete the following steps in sequence using the PIWIS System Tester by selecting PDCC >> System replacement >> Replace anti-roll bars <<: → 4303AW SAFETY REQUIREMENTS FOR PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
- 2.1. Set valve timing.
- 2.2. Bleed the system. → 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
- 2.3. Perform a system test.