LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (43 - Level Control, Air Suspension) >> WM 431019 Selector Switch (Level Adjustment) >> Removing And Installing

Removing And Installing

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The selector switch is bolted onto the centre console from underneath.

Fig 1: Locating Selector Switch On Centre Console
G09419228Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Remove centre console cover and cup holder. → WM 681919 REMOVING AND INSTALLING COVER FOR CENTRE CONSOLE
    Fig 2: Identifying Centre Console
    G09419229Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew the screws -Arrows-  on the back of the centre console cover and take out the selector switch.
    Fig 3: Locating Selector Switch Screws
    G09419230Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Fit the new selector switch into the centre console cover.
  4. Install centre console cover. → WM 681919 REMOVING AND INSTALLING COVER FOR CENTRE CONSOLE