Subsequent Work
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Complete the following steps in sequence using the PIWIS System Tester by selecting PDCC >> System replacement >> Replace distributor <<. → 4303AW SAFETY REQUIREMENTS FOR PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
- 1.1. Set valve timing
- 1.2. Bleed the system → 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)
- 1.3. Carry out a system test.
- Fit engine guard. → 108019 REMOVING AND INSTALLING ENGINE GUARD