Removing Rear Logo

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Logo

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat the rear lid
1. 1.1. Heat rear lid in area of the logo using the hot-air gun v.a.g 1416.
  
  Fig 2: Heating Rear Lid In Area
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Lift up the logo using a plastic spatula
1. 2.1. Move a plastic spatula under the logo and lift it up.
  
  Fig 3: Lifting Up Logo
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clean the rear lid
1. 3.1. Dissolve the adhesive residue on the cover using a silicone remover and remove it.
  
  Fig 4: Cleaning Logo Of Rear Lid
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.