Removing Roof Joint Cover Strip

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Roof Joint Cover Strip

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Identifying Roof Joint Cover Strip

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing roof joint cover strip
- Vehicles with panoramic roof
1. 1.1. Unscrew fastening screws -2- .
  
  Fig 3: Removing Fastening Screws
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Unhook roof edging strip -1a- from the holding clip -5- and remove.
  
  Fig 4: Removing Roof Edging Strip And Holding Clip
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Removing roof joint cover strip
- Vehicles with/without sliding roof
1. 2.1. Unscrew fastening screws -2- .
2. 2.2. Remove roof joint cover strip -1b- .
  
  Fig 5: Removing Roof Joint Cover Strip
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.