Installing Wing Trim Panel

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Wing Trim Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Fastening grommets must be replaced before installing the wing trim panel.

Clip in fastening grommets -1- on the wing -arrow A- .

Fig 2: Installing Wing Trim Panel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Slide fixing clips -2- into the wing trim panel -3- in direction of arrow.
Information

Make sure that the fixing clips lock with an audible click during fitting.
Hook wing trim panel -3- onto the wing flange -arrow B- and clip it in -arrow C- .