LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (01 - Sales Check) >> WM 010101 Alarm System: Checking Operation Of Indicators (All Models) >> Checking Indicators >> Alarm System: Checking Operation Of Indicators

Alarm System: Checking Operation Of Indicators

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle must be unlocked and the sales check item - Diagnosis system: systems activated and fault memory read out - must be performed.

  1. Lock vehicle with the remote control. Shortly after locking, no warning tone must be emitted by the alarm system horn. If a warning tone is emitted, check exterior covers, glove compartment cover, center console cover and all doors; open and close these items in turn.
  2. As soon as the vehicle is locked, the LED - in the middle of the driver's door trim panel - must flash quickly for 2 seconds and then flash slowly.

    Fault display: 

  3. LED flashes quickly for 2 seconds, lights up for 28 seconds and then flashes slowly >> connect the System Tester and read out the fault memory.
scientia non olet · About LEMON Manuals