Removing The Cover Under The Instrument Panel On The Passenger's Side
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Remove dashboard moulding on passenger's side. → Removing Trim Strips For Dashboard On The Driver's Side
- Remove cover under dashboard on the passenger's side. → Removing Cover Under Dashboard
- Remove ignition key.
- Loosen glove compartment.
- 4.1. Undo fastening screws -2- .
- 4.2. Open glove compartment -1- , unscrew the fastening screw -4- and remove rubber buffer -3- .
- Remove fuse box cover.
- 5.1. Unclip fuse box cover -5- using a plastic wedge on the retaining clips -6- and swivel it outwards (-arrow A- ).
- 5.2. Remove the fuse box cover -A- to the rear (-arrow B- ).
- Remove trim under dashboard at passenger's side.
- 6.1. Unscrew the fastening screws -8-
and swivel the trim panel under the dashboard on the passenger's side -7-
downwards (-arrow C-
). Pull out the trim panel under the dashboard on the passenger's side -7-
over the guide -9-
(-arrow D-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 6.1. Unscrew the fastening screws -8-
and swivel the trim panel under the dashboard on the passenger's side -7-
downwards (-arrow C-
). Pull out the trim panel under the dashboard on the passenger's side -7-
over the guide -9-
(-arrow D-
).
- Disconnect the plug connection switch for the passenger's airbag.
- 7.1. Release the plug -10- at the locking mechanism -11- (-arrows E- ) and pull it off.
- Remove the trim under the dashboard on the passenger's side -7- .