Installing The Cover Under The Instrument Panel On The Passenger's Side
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Insert the trim under the dashboard on the passenger's side.
- 1.1. Move the trim under the dashboard on the passenger's side -3- until the plug can be plugged in.
- Push on the plug -10- until the locking tabs engage audibly (-arrow A- ).
- Install trim under instrument panel at front passenger's side.
- 3.1. Insert trim under the dashboard on the driver's side -7- over the guide -9- (-arrow B- ).
- 3.2. Swivel the trim under the dashboard on the passenger's side -3- upwards (-arrow C- ).
- 3.3. Screw in -8- fastening screws.
- Install fuse box cover.
- 4.1. Insert front fuse box cover -5- (-arrow D- ).
- 4.2. Swivel fuse box cover -5- inward and push it in (-arrow E- ) until the retaining clips -6- engage audibly.
- Secure the glove compartment.
- 5.1. Screw in fastening screws -2- and tighten to the specified tightening torque. → Tightening torque: 1.0 ft lbs.+/- 0.15 ft lbs.
- 5.2. Open glove compartment lid -1- .
- 5.3. Insert rubber buffer -3- , screw in fastening screw -4- and tighten to the specified tightening torque. → Tightening torque: 1.0 ft lbs.+/-0.15 ft lbs.
- 5.4. Close glove compartment lid -1- .
- Install cover under dashboard on passenger's side. → Installing Cover Under Dashboard
- Install dashboard moulding on passenger's side. → Installing Trim Strips For Dashboard On The Driver's Side