Removing Luggage Compartment Trim Panel (Loadspace Cover)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Luggage Compartment Trim Panel (Loadspace Cover)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disengage loadspace cover -1- from front connection points by pulling towards the rear.

Fig 2: Disengaging Loadspace Cover From Front Connection Points
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew fastening screws -4- .

Fig 3: Unscrewing Fastening Screws
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unfold lashing tie-down ring strap.
Unscrew fastening screws -6- .

Fig 4: Removing Lashing Tie-Down Ring Strap
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove tie-down rings -5- .

Fig 5: Removing Tie-Down Rings
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove loadspace floor at sides -2, 3- .

Fig 6: Removing Loadspace Floor At Sides
Courtesy of PORSCHE CARS NORTH AMERICA, INC.