Installing Luggage Compartment Trim Panel (Loadspace Cover)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Luggage Compartment Trim Panel (Loadspace Cover)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Position loadspace floor at sides -2, 3- .

Fig 2: Positioning Loadspace Floor At Sides
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Tighten fastening screws -4- to the specified tightening torque. → Tightening torque: 8 Nm (6 Ft Lbs.)+/-1.5 Nm (+/-1.0 Ft Lbs.)

Fig 3: Tightening Fastening Screws
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engage loadspace cover -1- in front connection points by pushing forwards and close loadspace cover.

Fig 4: Engaging Loadspace Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position tie-down rings -5- .

Fig 5: Positioning Tie-Down Rings
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unfold lashing tie-down ring strap.
Screw in fastening screws -6- .

Fig 6: Installing Lashing Tie-Down Ring Strap
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Ensure Gaps Are Even.
Tighten fastening screws to the specified tightening torque. → Tightening torque: 8 Nm (6 Ft Lbs.)+/-1.5 Nm (+/- 1.0 ft lbs.)
Open and close loadspace cover -1- .

Fig 7: Opening Loadspace Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.