LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (10 - Engine - Crankcase, Suspension) >> WM 108319 Removing And Installing Engine Cover (Design Cover) On DFI Engines (Except Cayenne Diesel, Cayenne S TRANSSYBERIA Tip, Cayenne TRANSSYBERIA Man, Cayenne GTS Tip "PORSCHE Design Edition 3") >> Installing Engine Cover (Design Cover)

Installing Engine Cover (Design Cover)

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press rubber holders for throttle cover onto the five ball heads on the engine. Make sure that the rubber holders do not slip. If the throttle cover proves to be difficult to fit, spray the rubber holders with silicone spray.
scientia non olet · About LEMON Manuals