Technical Values Description
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Bracket for auxiliary units/engine mounting to lower part of crankcase | M10 x 45 (9 ea.) | Tightening torque | 65 Nm (48 ft lbs.) | ||
| Hydraulic mount to engine carrier | M10 x 65 (2 ea.) | Tightening torque | 60 Nm (44 ft lbs.) | ||
| Hydraulic mount to bracket for auxiliary units | M12 nut | Tightening torque | 75 Nm (56 ft lbs.) | ||
| Right engine carrier to crankcase | M10 x 45 (6 ea.) | Tightening torque | 65 Nm (48 ft lbs.) | ||
| Hydraulic mount to engine carrier | M10 x 65 (2 ea.) | Tightening torque | 60 Nm (44 ft lbs.) | ||
| Hydraulic mount to bracket for auxiliary units | M12 nut | Tightening torque | 75 Nm (56 ft lbs.) | ||
| Fastening screws on heat protection plate | Tightening torque | 10 Nm (7.5 ft lbs.) |