Replacing Crankcase On 4.8-litre DFI Engines
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Disassemble the engine. → Disassembling V6 DFI Engine
- The crankcase must only be replaced as a complete unit with the upper and lower part matching.
- Fit new crankshaft bearings. Replace piston rings. Visually inspect pistons.
- Assemble the engine. → Assembling V6 DFI Engine