LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (10 - Engine - Crankcase, Suspension) >> WM 1001IN Supporting V6 3.6-Litre DFI Engine On The Body (Cayenne Tip, Cayenne Man) >> Tools And Materials >> Tools

Tools And Materials: Tools

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Special Tools
G09408624Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Item Designation Source Explanation
-A-  Support bracket 10-222 A  Only this tool is tested and approved by Porsche. It ensures good support at the wing edge. 
-B-  Lifting tackle 3033  → "Commercially available" Only this tool is tested and approved by Porsche. 
-C-  Bonnet stay 9704   
-D-  Transport eyebolt 9700/1    Not required for the 3.6-litre V6! 
-E-  Adapter 9591/2   
instead of -D-  Transport eyebolt 9700/2    Bolted close to the high-pressure pump on the 3.6- litre V6. Must be removed after work is complete!