LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (10 - Engine - Crankcase, Suspension) >> WM 100119 Removing And Installing V8 4.8-Litre DFI Engine (Except Cayenne Tip, Cayenne Man, Cayenne Diesel) >> Tools And Materials >> Notes

Tools And Materials: Notes

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Elevating Platform
G09408393Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Assembly mandrel  => Height can be adjusted; used for mounting in the engine carrier; equipped with a locking screw to prevent engine from tilting and for height adjustment. Item 2 in base carrier 
  2. Wheel hub holder  => Secures the spring struts to prevent them from tilting. Inserted from the side into the second cross member from the front 
  3. Assembly mandrel  => Height can be adjusted; used for mounting in the front-axle carrier at the front; equipped with a locking screw to prevent engine from tilting and for height adjustment. Item 1 in base carrier 
  4. Support  => Not used here.
  5. Wishbone support  => Used in conjunction with -5-  to protect the wheel suspension and spring struts from damage.
  6. Assembly mandrel  => For mounting on the front-axle carrier at the rear. Item 3 in base carrier 
  7. Assembly mandrel  => Guide for positioning the elevating platform into the body; first moves into a bore in the body for centring roughly. Item 4 in base carrier 
  8. Assembly mandrel  => For mounting on the transmission cross member. Item 5 on base carrier 
    Fig 2: Identifying Tools Overview
    G09408394Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Wheel hub holder  => Secures the spring struts to prevent them from tilting.
  2. Support  => Prevents the engine from tilting backwards. Not generally used.
  3. Lateral mounting mandrel for engine carrier  => Height can be adjusted; used for mounting in the engine carrier; equipped with a locking screw to prevent engine from tilting and for height adjustment. Item 2 in base carrier 
    1. 3.1 - Support with height adjustment  => Screwed into part 3.
    2. 3.2 - Protection against tilting  => Screwed into part 3.1. Prevents the engine from tilting forward.
  4. Front front-axle carrier mounting  => Height can be adjusted; used for mounting in the front-axle carrier at the front; equipped with a locking screw to prevent engine from tilting and for height adjustment. Item 1 in base carrier 
    1. 4.1 - Support with height adjustment  => Screwed into part 4.
  5. Rear front-axle carrier mounting  => Item 3 in base carrier 
  6. Mounting in the body  => Item 4 in base carrier 
  7. Mounting for transmission cross member  => Item 5 in base carrier 

Information 

For the Cayenne S Diesel (V8), it may be necessary to convert the engine/transmission mounting WE 1206! 

scientia non olet · About LEMON Manuals