LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (27 - Starter, Power Supply, Cruise Control) >> WM 276019 Removing And Installing Starter (Cayenne S Tip, Cayenne S Man, Cayenne GTS Tip, Cayenne GTS Man, Cayenne S TRANSSYBERIA Tip, Cayenne S TRANSSYBERIA Man & Cayenne GTS Tip "PORSCHE Design Edition 3") >> Preliminary work

Preliminary work

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before the starter can be removed, the battery must be disconnected and the terminal covered. → WM 9000IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY (ALL MODELS) .
  2. Remove intake-air distributor. → Removing Intake-Air Distributor
  3. Remove fuel distribution pipe (fuel rail) on DFI engines. → Removing Fuel Distribution Pipe (Fuel Rail)
scientia non olet · About LEMON Manuals