Resetting Maintenance Interval
WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
If the engine oil is replaced at a service, the maintenance interval must be reset.
- In the Porsche System Tester, select Instrument cluster , then press [>>].
- Select the Coding menu, then press [>>].
- Select Reset Service Interval Display
menu, then press [>>].
Information
Depending on the country, additional items are checked in the case of the V6 model. These items must be selected on a country-specific basis.
- Select Reset menu and confirm with [F8].
- Quit menu, shut down PST and disconnect from vehicle.